Fix Bunn commercial and home coffee makers.
How to remove, clear and refit a Bunn sprayhead on the Speed Brew, Velocity Brew and My Café, and the three parts BUNN will actually send you.
Every common Bunn problem with BUNN's own answer and a link to the full fix, for the Speed Brew, Velocity Brew, Phase Brew, Heat N Brew and My Café.
Flashing red, flashing green, CLE or EE:03? What each Bunn code and light means according to BUNN, which model shows it, and what to do about it.
BUNN names three causes when the funnel overflows: the wrong filters, a missing sprayhead, and slow-draining coffee. Here's how to fix each one.
A Speed Brew should finish a pot in about 4 minutes. BUNN names just two causes when it drags, and clearing them in the right order saves hours.
The Phase Brew has no always-hot tank, so no heat means the heating phase never started. Four fixes for the HT, HG and Heat N Brew HB.
Bunn coffee maker dead? The warmer switch is not the tank switch, and no Bunn manual describes a reset button or a thermal fuse. Here is what to check.
BUNN's own descaling steps for the Speed Brew, Velocity Brew, Phase Brew, Heat N Brew and My Café, including the soak the two main manuals disagree on.
Water in, no coffee out? On most Bunns the lid, a 20 oz minimum and a full tank decide it. Steps from BUNN's manuals, including Phase Brew and My Café.
Bunn leaking from the top, the brew funnel or underneath? BUNN files each one differently, and only one of them ends in a phone call.
Hot plate, cold coffee? Bunn glass-carafe models have two switches, and the front one only runs the warmer. Plus what to do on a Phase Brew.
Discover more content by exploring these related tags
Commercial and home coffee brewers. Find expert troubleshooting guides for Speed Brew, Velocity Brew, NHS, and more Bunn coffee makers.
Weekly fixes, maintenance tips, and early guides — straight to your inbox. Free, forever.
No spam. Unsubscribe any time.